Videos - How-To Videos

How to Setup Ratio Pyrometer with Optris CompactPlus Connect Software

Learn how to set up CSvision and CTratio. This video is a detailed instructional guide on how to setup the ratio pyrometer with Optris CompactPlus Connect Software.

How to Set Up New Digital Interfaces

Learn how to set up and use the new digital interfaces for Optris CT and Xi series devices. This how-to video walks you through key features, settings, and integration options for improved connectivity and performance. Ideal for automation engineers and system integrators.

How to Create an Alarm Condition in PIXConnect

In this video, you’ll learn how to create an alarm condition in the Optris PIXConnect software and forward the alarm signal via the Industrial Process Interface to a visual signal indicator.

We’ll also show how to configure a snapshot to be taken automatically when an alarm is triggered. Watch step-by-step how to set everything up inside PIXConnect.

How to Set Up the Modbus TCP or Ethernet TCP/IP Interface

Learn how to set up communication and retrieve data from the Optris CT sensor via Modbus TCP or Ethernet TCP/IP.

Product Manager Andreas Rotärmel explains how to switch between static and dynamic IP modes and start taking measurements using CompactConnect software.
Perfect for integrating precise temperature measurement into your automation process!

How to Set Up the Optris EthernetIP Interface

Learn how to set up the Optris Ethernet/IP Interface using Rockwell automation software.

In this step-by-step tutorial, Product Manager Andreas Rotärmel walks you through connecting the hardware and configuring the software for precise temperature measurement.
Perfect for industrial automation professionals using Optris sensors!

How to Mount Xi 400 and Laminar Air Purge

This video shows how to mount the Xi 400 thermal imaging camera, the laminar air purge unit and the required mounting bracket.

How to install PIF and USB Server Gigabit in CoolingJacket Advanced

This video tutorial shows how to connect the optris Process Interface (PIF) and USB server Gigabit with a PI infrared camera and how to install them in the Optris CoolingJacket Advanced.

How to Use Alarm Indication for Xi 410

In this video we show you how to set the alarm indication of your Xi 410.

How to Replace Si-Protective Window on Laminar Air Purge Unit

This video shows how the Si-protection window of a laminar air purge unit can be replaced in a few steps.

How to Mount Xi 80 and Laminar Air Purge Unit

This video shows how to mount the Xi 80 thermal imaging camera, the laminar air purge unit and the required mounting bracket.

How to Connect PI Camera with USB Server Gigabit

This video tutorial shows how to connect different infrared cameras via USB Server and GigE switch with a PC and how to install the software.

How to Assemble Xi 400 Water Cooling Housing with Laminar Air Purge

This video shows how to mount the Xi 400 camera into the water cooling housing and afterwards how to attach the laminar air purge.

How to Install Laminar Air Purge into CoolingJacket

Learn how the new laminar air purge is mounted to an Optris CoolingJacket Advanced and how it functions.

How to Install an Optris Xi 80 Camera in an Ethernet Network with PoE

Learn how to install an Optris Xi 80 camera in an Ethernet network with PoE (Power over Ethernet).

How to Install PI Infrared Camera into CoolingJacket Advanced Standard

Watching this video, you will learn how to install a thermal imaging camera of the optris PI series into the CoolingJacket Advanced Standard.

How to Install Industrial Process Interface (PIF) for PI Cameras

In this video, Maik explains how to install and setup an Industrial PIF to allow forwarding of temperature data to a multimeter, setting alams and how to make use of the fail-safe relay.

How to Exchange Fiber Cables on CTratio

This video shows how to exchange a fiber cable on CTratio and and how to install a CTratio sensor head with the fiber cable and the electronics box.