Technical details of the optris PI 05M

• Scope of supply:
  USB camera incl. 1 lens,
  Lens tube with protective window,
  USB cable (1 m),
  table tripod,
  PIF cable incl. terminal block (1 m),
  software package optris PIX Connect,
  carrying case Alu
  optional: CoolingJacket, high temperature cable
• Detector: CMOS (15 μm x 15 μm)
• Optical resolution (switchable)/ Frame rate:
  764 x 480 pixels @ 32 Hz
  382 x 288 pixels @ 80 Hz (swichable to 27 Hz)
  72 x 56 pixels @ 1 kHz
  764 x 8 pixels @ 1 kHz (fast linescanning mode)
• Spectral range: 500 … 540 nm
• Temperature ranges:
  900 … 2450 °C (27 Hz mode)
  950 … 2450 °C (80 Hz and 32 Hz mode)
  1100 … 2450 °C (1 kHz mode)
• Optics:
  FOV @ 382 x 288 px:
  13° x 10° (f = 25 mm)FOV @ 764 x 480 px:
  26° x 16° (f = 25 mm)
• Thermal sensitivity (NETD)¹⁾:
  < 2 K (< 1400 °C)
  ‘< 4 K (< 2100 °C)
• System accuracy (at ambient temperature 23 ± 5°C) ²⁾:
  For object temperature < 2000 °C: ±1 % of reading for 27/32/80 Hz ±1,5 % of reading for 1 kHz
  For object temperature > 2000 °C: ±2 % of reading for 27/32/80 Hz ±2,5 % of reading for 1 kHz
• PC interface: USB 2.0 / optional USB to GigE (PoE) conversion
• High speed analog output (@ 1 kHz mode):
  0 – 10 V real-time output of 8×8 pixels (1 ms response time)
• Standard Process interface (PIF):
  0 – 10 V input, digital input (max. 24 V), 0 – 10 V output
• Industrial PIF:
  2x 0 – 10 V input, digital input (max. 24 V),
  3x 0/4-20 mA output, 3x relay (0 – 30 V/ 400 mA), fail-safe relay
• Cable length (USB):
  1 m (standard), 5 m, 10 m
  5 m and 10 m also available as HT cable (180 °C)
• Ambient temperature (T_Amb): 5 … 50 °C
• Storage temperature: -40 … 70 °C
• Relative humidity: 10 – 95 %, non-condensing
• Enclosure (size/ rating): 46 mm x 56 mm x 90 mm / IP 67 (NEMA 4)³⁾
• Weight: 245 – 311 g (depending on lens)
• Shock⁴⁾: IEC 60068-2-27 (25 g and 50 g)
• Vibration⁴⁾: IEC 60068-2-6 (sinus-shaped)/ IEC 60068-2-64 (broadband noise)
• Tripod mount: 1/4-20 UNC
• Power supply: USB

¹⁾ At 27 Hz, 32 Hz and 80 Hz
²⁾ At an ambient temperature of 25 ° C
³⁾ Only applies when lens protection tube is used 
⁴⁾ For more details see operator‘s manual

Areas of application for the thermal imager optris PI 05M

The short-waved infrared camera optris PI 05M is ideally suited for laser processing applications as radiation above 540 nm is blocked excellently. The new spectral range of 500 nm is less likely to be influenced by surrounding influences and thus ensures a precise measurement even when facing changing emissivity. The PI 05M is therefore perfectly suited for the temperature measurement of molten metals.

Thermography software optris PIX Connect included

All IR cameras are delivered with the thermography software optris PIX Connect, which has been developed specifically for the extensive documentation and analysis of thermal images. It allows you to analyse temperature data in real time as well as the remote control of your infrared camera. Furthermore, you can setup individual alarm levels for your process and define visual or acustic alarm signals.

Our thermography software is licence free and can easily be adjusted to your requirements.